AIR-AP1852I-R-K9C

4.8 11

Model:	AIR-AP1852I-R-K9C - Cisco Aironet 1852i Access Point
Detail:	802.11ac Wave 2 Access Point, 4x4:4, Internal Antenna, R Regulatory Domain, Configurable
List Price:	$1,025.00
Price:	$
Condition:	Brand New Sealed
Availability:	In stock
Shipping:	Express Shipping to world 2-10 Days, via DHL, FedEx, EMS, etc. ? If you finish the payment today, your order will arrive within the estimated delivery time.

US$ 0.00 In stock Brand New Sealed

Ask Our Experts

+86-755-83613914 (Tel)
+86-13824318994 (Mob)
86-755-25524084 (Fax)

Get Quotes up to
2x Faster

Project Inquiry

Overview

AIR-AP1852I-R-K9C is one of the Cisco Aironet 1850 Series Access Points. Cisco 1850 AP series is ideal f small and medium-sized netwks. This series suppts enterprise-class 4x4 MIMO, four-spatial-stream access points that suppt the IEEE’s new 802.11ac Wave 2 specification. The 1850 Series extends suppt to a new generation of Wi-Fi clients, such as smartphones, tablets, and high-perfmance laptops that have integrated 802.11ac Wave 2 suppt. The model AIR-AP1852I-R-K9C provides R Regulaty Domain and internal antennas. Model number ending in C is, by default, facty-shipped with a Cisco Mobility Express software image.

Quick Specs

Table 1 shows the quick specs of AIR-AP1852I-R-K9C.

Part Number	AIR-AP1852I-R-K9C
Description	802.11ac Wave 2 Access Point, 4x4:4, Internal-Ant, R Regulaty Domain ★ Model number ending in C is, by default, facty-shipped with a Cisco Mobility Express software image.
Features	- 4x4 MIMO with four spatial streams, single-user MIMO - 4x4 MIMO with three spatial streams, multiuser MIMO - MRC - 802.11ac beamfming (transmit beamfming) - 20-, 40-, and 80-MHz channels - PHY data rates up to 1.7 Gbps (80 MHz in 5 GHz) - Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) - 802.11 DFS - CSD suppt
Regulaty Domain	R (R regulaty domain): - 2.412 to 2.472 GHz; 3 channels - 5.180 to 5.320 GHz; 8 channels - 5.660 to 5,805 GHz; 7 channels
Antenna	Internal Antenna
Interfaces	- 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE) - 1 x 10/100/1000BASE-T autosensing (RJ-45), AUX (used f Link Aggregation) - Management console pt (RJ-45) - USB 2.0 (enabled via future software)
Dimensions (W x L x H)	8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm)
Weight	3.12 lb (1.41 kg)

Product Details

Figure 1 shows the AIR-AP1852I LED Indicat Position.

AIR-AP1852I Face

Note: ① LED indicat position

Table 2 shows the AP LED indicats’ descriptions.

Message Type	LED State	Message Meaning
Association status	Chirping Green	Nmal operating condition, but no wireless client associated
Association status	Green	Nmal operating condition, at least one wireless client association
Boot loader status	Green	Executing boot loader
Boot loader err	Red	Boot loader signing verification failure
Access point regulaty domain priming status	Blinking Amber	AP priming to a new regulaty domain by Neighb Discovery Protocol (NDP), in progress
	Cycling Red, Green and off	AP waiting to be primed
	Chirping Red	AP primed to a wrong regulaty domain
Operating status	Blinking amber	Software upgrade in progress
	Cycling through green, red, and amber	Discovery/join process in progress
	Rapidly cycling through red, green, amber, and off.	Access point location command invoked from controller web interface.
Access point operating system errs	Cycling through red, green, amber, and off	General warning; insufficient inline power

Figure 2 shows AIR-AP1852I Pts and Connections.

AIR-AP1852I Pts and Connections

Note:

①	Mode button	④	AUX (Auxiliary) pt.
②	RJ-45 console pt	⑤	PoE-In pt (Ethernet Uplink pt)
③	USB 2.0 pt	⑥	48 V DC input power pt

AUX (Auxiliary) pt appears in the wireless controller user interface as GigabitEthernet1. This pt, along with the PoE-In pt, is used f Link Aggregation. This pt is disabled when using 802.3af (15.4W) power.

Compare to Similar Items

Table 3 shows the comparison between two AP.

Part Number	AIR-AP1852I-R-K9	AIR-AP1852I-R-K9C
Description	802.11ac Wave 2 Access Point, 4x4:4	802.11ac Wave 2 Access Point, 4x4:4 ★ Model number ending in C is, by default, facty-shipped with a Cisco Mobility Express software image.
Antenna	Internal Antennas	Internal Antennas
Regulaty Domain	R (R regulaty domain): - 2.412 to 2.472 GHz; 3 channels - 5.180 to 5.320 GHz; 8 channels - 5.660 to 5,805 GHz; 7 channels	R (R regulaty domain): - 2.412 to 2.472 GHz; 3 channels - 5.180 to 5.320 GHz; 8 channels - 5.660 to 5,805 GHz; 7 channels

Get Me Infmation

Do you have any question about the AIR-AP1852I-R-K9C?

Specification

AIR-AP1852I-R-K9C Specifications
Description	802.11ac Wave 2 Access Point, 4x4:4, Internal-Ant, R Regulatory Domain ★ Model number ending in C is, by default, factory-shipped with a Cisco Mobility Express software image.
Software	Cisco Unified Wireless Network Software Release with AireOS wireless controllers: 8.1 MR1 or later for the Cisco Aironet 1850 Series Access Points
Regulatory Domain	R (R regulatory domain): - 2.412 to 2.472 GHz; 3 channels - 5.180 to 5.320 GHz; 8 channels - 5.660 to 5,805 GHz; 7 channels
Deployment modes	Centralized local, Standalone, Sniffer, Cisco FlexConnect, Monitor, OfficeExtend, Mesh
Supported wireless LAN controllers	Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 5760 Series Wireless Controllers, Cisco Catalyst 3650/3850 Series switch with integrated controller Cisco Mobility Express
802.11n version 2.0 (and related) capabilities	4x4 MIMO with four spatial streams Maximal ratio combining (MRC) 20- and 40-MHz channels PHY data rates up to 600 Mbps (40 MHz with 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) 802.11 dynamic frequency selection (DFS) Cyclic shift diversity (CSD) support
802.11ac Wave 1 and 2 capabilities	4x4 MIMO with four spatial streams, single-user MIMO 4x4 MIMO with three spatial streams, multiuser MIMO MRC 802.11ac beamforming (transmit beamforming) 20-, 40-, and 80-MHz channels PHY data rates up to 1.7 Gbps (80 MHz in 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) 802.11 DFS CSD support Rogue device detection
Integrated antenna	2.4 GHz, gain 3 dBi, internal omni, horizontal beamwidth 360° 5 GHz, gain 5 dBi, internal omni, horizontal beamwidth 360°
Interfaces	1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE) 1 x 10/100/1000BASE-T autosensing (RJ-45), AUX (used for Link Aggregation) Management console port (RJ-45) USB 2.0 (enabled via future software)
Indicators	Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Dimensions (W x L x H)	Access point (without mounting bracket): 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm)
Weight	3.12 lb (1.41 kg)
Environmental	Cisco Aironet 1850i Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) Nonoperating (storage) altitude test: 25˚C, 15,000 ft. Operating temperature: 32° to 104°F (0° to 40°C) Operating humidity: 10% to 90% (noncondensing) Operating altitude test: 40˚C, 9843 ft.
System memory	1 GB DRAM 256 MB flash
Input power requirements	AP1850: 44 to 57 VDC Power supply and power injector: 100 to 240 VAC; 50 to 60 Hz
Power draw	20.9W Note: When deployed using a Power over Ethernet (PoE) specification, the power drawn from the power sourcing equipment will be higher by some amount, depending on the length of the interconnecting cable.
Powering options	802.3at Enhanced PoE Cisco power injector, AIR-PWRINJ4= Cisco local power supply, AIR-PWR-C= Cisco power injector, AIR-PWRINJ5= (Note:this injector supports 802.3af only) 802.3af Note: If 802.3af PoE is the source of power, (1) the 1852e 2.4-GHz radio will shift to 2x3 from 3x4, (2) The USB port and AUX Ethernet port are disabled on both the 1852i and 1852e.
Warranty	Limited lifetime hardware warranty

Shipping & Payment

Delivery

Cargo will be delivered within 1 day after payment arrived. Tracking Number will be offered once delivery done.

Delivery Options	Estimated Delivery Time
DHL	2-4 business days
Fedex	2-4 business days
Hong Kong EMS	5-10 business days
Hong Kong Air Parcel	10-20 business days
By Sea	10-20 business days

Notice:

Above mentioned information are just for your reference only,we will keep you posted for the tracking delivery schedule.There are two delivery options available for by air and by sea:

Deliver to port:

daqintech.com is responsible for transporting goods to port. All subsequent customs and transportation fees are the
responsibility of the buyer. Router-switch will recommend trustworthy local freight forwarders to you.daqintech.com can facilitate the progress under buyer's permission and at buyer's expense.

Deliver to door:

daqintech.com will quote all destination charge prior once we have confirmed order.
daqintech.com is responsible for transporting goods to door after you have made the payment.

Payment Methods


Paypal	Master Card	Visa


Discover	American Express	JCB


Wire Transfer	eCheck	WestUnion

Warranty

Warranty

100% Low Price Guarantee:

daqintech.com provides high-quality products at low wholesale prices

All items are ORIGINAL and GENUINE only:

Item conditions are all "New Sealed".
All items are fully tested with working conditions by Huawei certified engineer under customers' permission.

100% Money Back Guarantee:

If your returns meet our relevent standards，you can contact our customer service team to exchange or return any product that you bought from us.

Professional Technical Support:

daqintech.com experienced technical team can provide support over the phone, by chat, by email or by remotely login.

Flexible Secure Payment & Shipment:

Verified authorization: Mcafee Secure, VeriSign Secured

Return Material Authorization (RMA) Process

Standard Hardware Warranty Policy:

Original new sealed Huawei product: 1 Year.

The Support Contacts:

If your products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.

Standard Services